# Port on which the server is listening. You must select a different
# port from your standard http web server if it is running on the same
# computer.
Port 9000
# Address on which the server is bound. Only useful if you have
# several network interfaces.
BindAddress 0.0.0.0
# Number of simultaneous requests that can be handled. Since FFServer
# is very fast, this limit is determined mainly by your Internet
# connection speed.
MaxClients 1000
# This the maximum amount of kbit/sec that you are prepared to
# consume when streaming to clients
MaxBandwidth 5000
# Access Log file (uses standard Apache log file format)
# '-' is the standard output
CustomLog /var/log/ffserver.log
# Suppress that if you want to launch ffserver as a daemon
NoDaemon
##################################################################
# Definition of the live feeds. Each live feed contains one video
# and/or audio sequence coming from an ffmpeg encoder or another
# ffserver. This sequence may be encoded simultaneously with several
# codecs at several resolutions.
# You must use 'ffmpeg' to send a live feed to ffserver. In this
# example, you can type:
#
# ffmpeg http://localhost:9000/feed1.ffm
# ffserver can also do time shifting. It means that it can stream any
# previously recorded live stream. The request should contain:
# "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify
# a path where the feed is stored on disk. You also specify the
# maximum size of the feed (100M bytes here). Default:
# File=/tmp/feed_name.ffm FileMaxSize=5M
File /tmp/feed1.ffm
FileMaxSize 10M
NoAudio
# Specify launch in order to start ffmpeg automatically
#Launch
# Only allow connections from localhost to the feed
ACL allow 127.0.0.1
##################################################################
# Now you can define each stream which will be generated from the
# original audio and video stream. Each format has a filename (here
# 'test128.mpg'). FFServer will send this stream when answering a
# request containing this filename.
# coming from live feed 'feed1'
Feed feed1.ffm
# Format of the stream : you can choose among:
# mpeg : MPEG1 multiplexed video and audio
# mpegvideo : only MPEG1 video
# mp2 : MPEG audio layer 2
# mp3 : MPEG audio layer 3 (currently sent as layer 2)
# rm : Real Networks compatible stream. Multiplexed audio and video.
# ra : Real Networks compatible stream. Audio only.
# mpjpeg : Multipart JPEG (works with Netscape without any plugin)
# jpeg : Generate a single JPEG image.
# asf : ASF compatible stream (Windows Media Player format). Not finished yet.
# swf : Macromedia flash(tm) compatible stream
# avi : AVI format (open divx video, mpeg audio sound)
# master : special ffmpeg stream used to duplicate a server
Format mpeg
# Bitrate for the audio stream. Codecs usually support only a few different bitrates.
#AudioBitRate 32
# Number of audio channels : 1 = mono, 2 = stereo
#AudioChannels 1
# Sampling frequency for audio. When using low bitrates, you should
# lower this frequency to 22050 or 11025. The supported frequencies
# depend on the selected audio codec.
#AudioSampleRate 44100
# Bitrate for the video stream.
VideoBitRate 64
# Number of frames per second
VideoFrameRate 5
# Size of the video frame : WxH (default: 160x128)
# W : width, H : height
# The following abbreviation are defined : sqcif, qcif, cif, 4cif
VideoSize 352x288
# transmit only intra frames (useful for low bitrates, but kills frame rate)
#VideoIntraOnly
# If non intra only, an intra frame is transmitted every VideoGopSize
# frames Video synchronization can only begin at an I frames.
VideoGopSize 12
# Choose your codecs:
#AudioCodec mp2
VideoCodec mpeg1video
# Suppress audio
NoAudio
# Suppress video
#NoVideo
#VideoQMin 3
#VideoQMax 31
# Set this to the number of seconds backwards in time to start. Note that
# most players will buffer 5-10 seconds of video, and also you need to allow
# for a key frame to appear in the data stream.
#PreRoll 15
# ACL:
# You can allow ranges of addresses (or single addresses)
# ACL ALLOW
# You can deny ranges of addresses (or single addresses)
# ACL DENY
# You can repeat the ACL allow/deny as often as you like. It is on a per stream basis. The first
# match defines the action. If there are no matches, then the default is the inverse of the last
# ACL statement. Thus 'ACL allow localhost' only allows access from localhost.
# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and allow everybody else.
# coming from live feed 'feed1'
Feed feed1.ffm
# Format of the stream : you can choose among:
# mpeg : MPEG1 multiplexed video and audio
# mpegvideo : only MPEG1 video
# mp2 : MPEG audio layer 2
# mp3 : MPEG audio layer 3 (currently sent as layer 2)
# rm : Real Networks compatible stream. Multiplexed audio and video.
# ra : Real Networks compatible stream. Audio only.
# mpjpeg : Multipart JPEG (works with Netscape without any plugin)
# jpeg : Generate a single JPEG image.
# asf : ASF compatible stream (Windows Media Player format). Not finished yet.
# swf : Macromedia flash(tm) compatible stream
# avi : AVI format (open divx video, mpeg audio sound)
# master : special ffmpeg stream used to duplicate a server
Format mpeg
# Bitrate for the audio stream. Codecs usually support only a few different bitrates.
#AudioBitRate 32
# Number of audio channels : 1 = mono, 2 = stereo
#AudioChannels 1
# Sampling frequency for audio. When using low bitrates, you should
# lower this frequency to 22050 or 11025. The supported frequencies
# depend on the selected audio codec.
#AudioSampleRate 44100
# Bitrate for the video stream.
VideoBitRate 256
# Number of frames per second
VideoFrameRate 5
# Size of the video frame : WxH (default: 160x128)
# W : width, H : height
# The following abbreviation are defined : sqcif, qcif, cif, 4cif
VideoSize 352x288
# transmit only intra frames (useful for low bitrates, but kills frame rate)
#VideoIntraOnly
# If non intra only, an intra frame is transmitted every VideoGopSize
# frames Video synchronization can only begin at an I frames.
VideoGopSize 12
# Choose your codecs:
#AudioCodec mp2
VideoCodec mpeg1video
# Suppress audio
NoAudio
# Suppress video
#NoVideo
#VideoQMin 3
#VideoQMax 31
# Set this to the number of seconds backwards in time to start. Note that
# most players will buffer 5-10 seconds of video, and also you need to allow
# for a key frame to appear in the data stream.
#PreRoll 15
# ACL:
# You can allow ranges of addresses (or single addresses)
# ACL ALLOW
# You can deny ranges of addresses (or single addresses)
# ACL DENY
# You can repeat the ACL allow/deny as often as you like. It is on a per stream basis. The first
# match defines the action. If there are no matches, then the default is the inverse of the last
# ACL statement. Thus 'ACL allow localhost' only allows access from localhost.
# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and allow everybody else.
# coming from live feed 'feed1'
Feed feed1.ffm
# Format of the stream : you can choose among:
# mpeg : MPEG1 multiplexed video and audio
# mpegvideo : only MPEG1 video
# mp2 : MPEG audio layer 2
# mp3 : MPEG audio layer 3 (currently sent as layer 2)
# rm : Real Networks compatible stream. Multiplexed audio and video.
# ra : Real Networks compatible stream. Audio only.
# mpjpeg : Multipart JPEG (works with Netscape without any plugin)
# jpeg : Generate a single JPEG image.
# asf : ASF compatible stream (Windows Media Player format). Not finished yet.
# swf : Macromedia flash(tm) compatible stream
# avi : AVI format (open divx video, mpeg audio sound)
# master : special ffmpeg stream used to duplicate a server
Format mpeg
# Bitrate for the audio stream. Codecs usually support only a few different bitrates.
#AudioBitRate 32
# Number of audio channels : 1 = mono, 2 = stereo
#AudioChannels 1
# Sampling frequency for audio. When using low bitrates, you should
# lower this frequency to 22050 or 11025. The supported frequencies
# depend on the selected audio codec.
#AudioSampleRate 44100
# Bitrate for the video stream.
VideoBitRate 64
# Number of frames per second
VideoFrameRate 5
# Size of the video frame : WxH (default: 160x128)
# W : width, H : height
# The following abbreviation are defined : sqcif, qcif, cif, 4cif
VideoSize 352x288
# transmit only intra frames (useful for low bitrates, but kills frame rate)
#VideoIntraOnly
# If non intra only, an intra frame is transmitted every VideoGopSize
# frames Video synchronization can only begin at an I frames.
VideoGopSize 12
# Choose your codecs:
#AudioCodec mp2
VideoCodec mpeg1video
# Suppress audio
NoAudio
# Suppress video
#NoVideo
#VideoQMin 3
#VideoQMax 31
# Set this to the number of seconds backwards in time to start. Note that
# most players will buffer 5-10 seconds of video, and also you need to allow
# for a key frame to appear in the data stream.
#PreRoll 15
# ACL:
# You can allow ranges of addresses (or single addresses)
# ACL ALLOW
# You can deny ranges of addresses (or single addresses)
# ACL DENY
# You can repeat the ACL allow/deny as often as you like. It is on a per stream basis. The first
# match defines the action. If there are no matches, then the default is the inverse of the last
# ACL statement. Thus 'ACL allow localhost' only allows access from localhost.
# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and allow everybody else.
# coming from live feed 'feed1'
Feed feed1.ffm
# Format of the stream : you can choose among:
# mpeg : MPEG1 multiplexed video and audio
# mpegvideo : only MPEG1 video
# mp2 : MPEG audio layer 2
# mp3 : MPEG audio layer 3 (currently sent as layer 2)
# rm : Real Networks compatible stream. Multiplexed audio and video.
# ra : Real Networks compatible stream. Audio only.
# mpjpeg : Multipart JPEG (works with Netscape without any plugin)
# jpeg : Generate a single JPEG image.
# asf : ASF compatible stream (Windows Media Player format). Not finished yet.
# swf : Macromedia flash(tm) compatible stream
# avi : AVI format (open divx video, mpeg audio sound)
# master : special ffmpeg stream used to duplicate a server
Format mpeg
# Bitrate for the audio stream. Codecs usually support only a few different bitrates.
AudioBitRate 32
# Number of audio channels : 1 = mono, 2 = stereo
AudioChannels 1
# Sampling frequency for audio. When using low bitrates, you should
# lower this frequency to 22050 or 11025. The supported frequencies
# depend on the selected audio codec.
AudioSampleRate 22050
# Bitrate for the video stream.
VideoBitRate 64
# Number of frames per second
VideoFrameRate 5
# Size of the video frame : WxH (default: 160x128)
# W : width, H : height
# The following abbreviation are defined : sqcif, qcif, cif, 4cif
VideoSize 352x288
# transmit only intra frames (useful for low bitrates, but kills frame rate)
#VideoIntraOnly
# If non intra only, an intra frame is transmitted every VideoGopSize
# frames Video synchronization can only begin at an I frames.
VideoGopSize 12
# Choose your codecs:
AudioCodec mp2
VideoCodec mpeg1video
# Suppress audio
#NoAudio
# Suppress video
#NoVideo
#VideoQMin 3
#VideoQMax 31
# Set this to the number of seconds backwards in time to start. Note that
# most players will buffer 5-10 seconds of video, and also you need to allow
# for a key frame to appear in the data stream.
#PreRoll 15
# ACL:
# You can allow ranges of addresses (or single addresses)
# ACL ALLOW
# You can deny ranges of addresses (or single addresses)
# ACL DENY
# You can repeat the ACL allow/deny as often as you like. It is on a per stream basis. The first
# match defines the action. If there are no matches, then the default is the inverse of the last
# ACL statement. Thus 'ACL allow localhost' only allows access from localhost.
# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and allow everybody else.
ACL allow 212.240.221.150
ACL allow 10.0.0.13
ACL allow 127.0.0.1
# second mpeg stream with high frame rate
##################################################################
# Another stream : Real with audio and video at 64 kbits
Feed feed1.ffm
Format mp2
AudioChannels 1
#AudioBitRate
AudioSampleRate 44100
#VideoBitRate 32
#VideoFrameRate 10
#VideoIntraOnly
ACL allow 212.240.221.150
ACL allow 10.0.0.13
ACL allow 127.0.0.1
##################################################################
# Another stream : Multipart JPEG
#
#Feed feed1.ffm
#Format mpjpeg
#VideoBitRate 128
#VideoFrameRate 2
#VideoIntraOnly
#NoAudio
#VideoSize 320x240
#
##################################################################
# Another stream : Multipart JPEG
#
#
#Feed feed1.ffm
#Format jpeg
#
## the parameters are choose here to take the same output as the
## Multipart JPEG one.
#VideoFrameRate 2
#VideoIntraOnly
#VideoSize 320x240
#VideoSize 352x240
#NoAudio
#
#
#old alfiecam applet support
#
Feed feed1.ffm
Format jpeg
#
## the parameters are choose here to take the same output as the
## Multipart JPEG one.
VideoFrameRate 1
VideoBitRate 128
VideoHighQuality
VideoIntraOnly
VideoSize 352x288
#VideoSize 352x240
NoAudio
#VideoQMin 25
#VideoQMax 31
##################################################################
# Another stream : Flash
#
#Feed feed1.ffm
#Format swf
#VideoHighQuality
#VideoFrameRate 2
#VideoIntraOnly
#
#
##################################################################
# Another stream : ASF compatible
Feed feed1.ffm
Format asf
VideoFrameRate 5
VideoSize 352x288
#VideoBitRate 128
VideoBitRate 64
#VideoIntraOnly
#VideoGopSize 30
#AudioBitRate 64
StartSendOnKey
NoAudio
Feed feed1.ffm
Format asf
#AudioBitRate 32
#AudioSampleRate 16000
#AudioChannels 1
VideoHighQuality
VideoFrameRate 5
VideoSize 320x240
VideoBitRate 256
#VideoGopSize 30
#VideoIntraOnly
StartSendOnKey
NoAudio
##################################################################
# RTSP examples
# You can access to this stream with the RTSP URL:
#
# rtsp://localhost:5454/test1-rtsp.mpg
#
# A non standard redirector is also created. Its URL is:
#
# http://localhost:8090/test1-rtsp.rtsp
#
#
#
#Format rtp
#Feed feed1.ffm
#File "/usr/local/httpd/htdocs/test1.mpg"
#
#
##################################################################
# Special stream : server status
Format status
# Only allow local people to get to the status
ACL allow localhost
ACL allow 192.168.0.0 192.168.255.255
FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico
# maps index.html to the appropriate site
URL http://ffmpeg.sourceforge.net/